MOVITRAC® advanced standard inverter

  • MOVITRAC® advanced standard inverter connected via an orange cable to a gearmotor

    The easy way to control any motor

If you want to save time while also gaining flexibility, look no further than our MOVITRAC® advanced standard inverter. Thanks to its power range of 0.25 to 315 kW and extensive, scalable functions, the unit can be used in many different areas of application.

The compact standard redefined

Three red standard inverters hanging on a gray concrete wall

If you need a compact inverter that makes your work easier and, at the same time, keeps your control system options open, our MOVITRAC® advanced is exactly the right choice.

Designed and developed as a compact all-rounder, MOVITRAC® advanced can control and monitor synchronous and asynchronous AC motors with or without an encoder, asynchronous motors with LSPM technology, and both synchronous and asynchronous linear motors. What's more, it benefits from a wide power range of 0.25 to 315 kW and an overload capacity of 150%.

MOVITRAC® advanced is flexible thanks to its integrated communication interfacefor connection to all standard control systems. Connection is possible via PROFINET, EtherNet/IPTM, EtherCAT®/SBusPLUS, Modbus TCP, EtherCAT® CiA402 or POWERLINK CiA402. You can also configure functional safety with MOVITRAC® advanced – from the integrated STO safety function to higher-level safety functions and safe communication.

MOVITRAC® advanced is ideal for materials handling and motion applications such as conveyor belts, hoists and palletizers, making it a true compact all-rounder.


Facts about MOVITRAC® advanced

  • Properties & technical data
  • Benefits & areas of application
  • Communication
  • Digital motor and data integration Digital motor and data integration
  • MOVIKIT® software modules
  • Functional safety
  • Further options Further options
  • Topologies
  • Product labels

Properties

Motor design

  • Synchronous and asynchronous AC motors with/without an encoder
  • Asynchronous motors with LSPM technology
  • Synchronous and asynchronous linear motors

Degree of protection: IP10, IP20 optional (only with power connectors plugged in for grid and motor)

Interference emission: Limit value class C2 to EN 61800-3. The interference suppression level can be improved with relevant measures. You will find further information about this in the product manual ("EMC-compliant installation according to EN 61800-3" section).

Connections: Spring-loaded terminals up to 7.5 kW units

Further options

  • Control modes: U/f, VFCPlus, ELSM®, CFC
  • Torque, speed or position control
  • Plug-in and scalable keypads or MOVISUITE® engineering software for startup
  • MOVIKIT® software modules for easy startup
  • Portable memory module for easy device replacement without engineering software

Selected technical data

Close table
Technical data Nominal line voltage
V

1 × AC 200 – 240
3 × AC 200 – 240
3 × AC 380 – 500
Sizes
0S – 0L
0S, 0L, 3 – 6
0S, 0L, 3 – 8
Nominal power
kW
0.25 – 315
Overload capacity 150%
We have stored a table for you here.

The benefits for you

  • Save time
    thanks to the electronic nameplate and use of preconfigured MOVIKIT® software modules.
  • We've kept things simple
    by ensuring the device can be replaced during servicing without an engineering PC and by storing all device data in a portable memory module.
  • You keep your options open
    because the inverter can be connected to standard control systems and supports various fieldbus protocols.
  • You remain flexible
    thanks to configurable functional safety – from the integrated STO safety function to higher-level safety functions.

MOVITRAC® advanced is highly versatile

Close table
Hoist with red drive unit and SEW package Horizontal and vertical application with red drive units and SEW packages Conveyor belt with red drive units and SEW packages
Hoists Horizontal/vertical materials handling technology Materials handling technology
We have stored a table for you here.

Integrated communication interfaces

  • Binary and analog inputs
  • PROFINET
  • EtherNET/IPTM
  • EtherCAT®/SBusPLUS
  • Modbus TCP
  • EtherCAT® CiA402
  • POWERLINK CiA402

Digital motor and data integration

Single-cable technology for power supply and data transfer with digital encoder for synchronous and asynchronous motors

In fact, only one hybrid cable is required and installed here for the data connection between inverter and motor, and the MOVILINK® DDI digital data interface transfers the power, brake and diagnostic data to the motor.

MOVIKIT®software modules in the "Drive" and "Motion" categories can be used in conjunction with MOVITRAC® advanced. The "Drive" category includes MOVIKIT® software modules that are operated directly on the MOVITRAC® advanced standard inverter:

  • MOVIKIT® Velocity Drive: MOVIKIT® Velocity Drive allows you to use applications with velocity control and a standardized fieldbus interface.
  • MOVIKIT® RapidCreepPositioning Drive: MOVIKIT® RapidCreepPositioning Drive is a software module for implementing classic "rapid/creep speed positioning" without a motor encoder.
  • MOVIKIT® Positioning Drive: MOVIKIT® Positioning Drive enables positioning applications with a standardized fieldbus interface.

Different functional scopes are available, depending on the functional safety option selected (CSO, CSB or CSL). The table below provides an overview.

Functional safety overview

Close table
Hardware MOVISAFE®
…/CSO/…
MOVISAFE®
…/CSB/…
MOVISAFE®
…/CSL/…
Safe inputs - 4 4
Safe outputs - - 1
Safe stop function STO PL d STO PL d, SS1c STO PL d, SS1c, SS1b
Safe brake control - - SBC
Safe motion - - SLS, SSM
Safe direction of rotation - - SDI
Safe communication - PROFISafe, FSoE PROFISafe, FSoE
Safe encoders - - EI7C-FS
We have stored a table for you here.
  • STO in PL d integrated in the basic unit (can only be deselected if using the "binary and analog inputs" unit design)
  • Configurable safety functions such as SBC, SDI and SLS (availability depends on functional safety option)
  • Safe communication configurable via PROFIsafe/PROFINET (FSoE – Fail Safe over EtherCAT® in preparation)

Available options

Keypads

Various keypads with different functional scopes are available.

Memory module
All device data (parameter and configuration settings) is always stored on the memory module and is kept up to date. If a device needs to be replaced, the system can be started up again in next to no time without additional tools by simply removing the memory module from the old device and plugging it into the replacement.

Diagnostic module
The CDM11A diagnostic module creates the interface to the MOVISUITE®engineering software. The module also contains two 7-segment displays for displaying the device status. In addition, the module is required for use of the CBG11A and CBG21A keypads.

Mounting plates

Sub-mounting plates for sizes 0S and 0L, including pre-installed braking resistor – for space-saving mounting of braking resistors underneath the inverter.

Shield plate extension – for space-saving mounting of e.g. SEW brake rectifiers or multi-level terminal blocks.

Topologies

From control technology to inverters and drives, whether centralized or decentralized, there are no language barriers with any of the components from the MOVI-C® modular automation system.

Plan the design of your machines or systems with a single control, communication or installation topology. Our hardware and software will slot seamlessly into place and simply get things moving.

Even when it comes to communication know-how, the standard solution has no limitations. Whatever control or communication topology you specify, MOVITRAC® will have the necessary interface built and make light work of controlling the motor assigned to it.

Certifications / Conformity

  • CE (European Economic Area)
  • EAC (Customs Union of Russia, Kazakhstan and Belarus)
  • RCM (Australia, New Zealand)
  • RoHS (China)
  • cULus (USA, Canada)
  • KC (South Korea)
  • UKCA (United Kingdom)
  • CMIM (Morocco)
  • WEEE (European Economic Area)

Ready for use in your application:

MOVITRAC® advanced standard inverter

With which products can the MOVITRAC® advanced standard inverter be combined?

Virtually all components from SEW‑EURODRIVE's modular system, so your application is bound to be covered. Combine the standard inverter with standard or servo gearmotors such as the following new addition to the range: CM3C.. series synchronous servomotors – find out more here. Or simply select an appropriate decentralized drive for your requirements.

SEW image

Ideal when space is tight

MOVITRAC® advanced hardly takes up any space in the control cabinet and is a compact all-rounder that makes light work of controlling any motor.

SEW image

Ideal when practical efficiency really matters

Includes features such as energy-saving functions and the MOVILINK® DDI digital motor and data interface for rapid startup.

SEW image

Ideal when safety is paramount

STO PL d, the safe top function, is integrated into the basic unit. A total of three different safety options can be configured.

SEW image

Contact

Our team of experts will answer any questions you have about the MOVI‑C® modular automation system and recommend the right solution for your requirements.

Contact our specialists

Quote

What MOVITRAC® advanced can do and what it offers you

A quote from Sascha Ochs, product manager for MOVITRAC® advanced.

Configure your customized product

  • Detailed information about your customized product
  • CAD data and documentation for your configuration
  • Option to directly request a quotation or place an order
Configure product now

Further information