Extensive functions
from speed control to positioning of simple lifting axes as well as availability of all common bus systems.
Low total costs
owing to the energy-optimized brake control, operation of IE2 to IE4 motors and saving on external components.
Rapid system availability
due to pluggable connections, configuration via DIP switches as well as an overall concept with only one screw.
Confirmed safety
by means of compliance with certified safety options from secure communication and safe disconnection through to safe motion.
Low complexity
due to full pluggability and integrated additional functions (maintenance switch etc.) for simple system planning.
Drives made easy! Our decentralized standard inverter MOVIFIT® FC in the classic function level design provides a wide range of drive functions. Everything is possible from simple speed control to the operation of simple lifting axes. Comprehensive safety functions and operation on virtually all common fieldbus systems for use in a broad range of applications.
Save energy and operate your plant efficiently. Combine our MOVIFIT® FC with our DRU..J series (IE4 motors) energy efficient motors and an efficient brake control.
No startup is needed for simple applications. Simple DIP switches make the relevant settings following which the inverter is immediately ready for use. It is controlled via the PLC using standardized process data profiles. Our "MOVIFIT® Gateway Configurator" provides you with simple configuration and diagnostics options even for more complex applications.
Our standard inverter MOVIFIT® FC has more than just internal strengths. The high degree of protection IP65 is standard. Its robust aluminum die cast housing is divided into electronics unit (EBOX) and connection unit (ABOX). A major benefit is the closing mechanism with only one screw and the automatic unit replacement. This enables quick assembly and smooth unit replacement for servicing.
Save costs and time on installation as well. The integrated T distributor for energy and communication, the integrated repair switch and digital IOs means that a wide variety of external additional components are no longer required for the installation.
The HygienicPlus design for use in extreme ambient conditions, for example in wet conditions in the beverage industry, are also available as standard.
Discover more on this site regarding the connection variants, details about the hygienic design, the safety functions and the functional scope of our associated software (function level).
The inverter consists of an electronics unit (EBOX) and the connection unit shown here (ABOX). The MOVIFIT® connection box (ABOX) is a large connector and is entirely passive. The closing mechanism with only a single screw ensures fast assembly and smooth unit replacement for maintenance. It is available in two designs:
All cables to be connected are routed into the ABOX via cable glands and wired to terminals at this point.
The MOVIFIT® hybrid connection box (ABOX) offers the option of making various connections as a plug. All cables for power supply and the motor cables are routed into the ABOX via cable glands and wired to terminals at this point. M12 connectors are provided for digital inputs and outputs. The bus system can be connected via connectors. The bus connectors vary depending on the fieldbus used.
The function level indicates the functional scope of the software assigned to the MOVIFIT® units in terms of:
"Classic" function level
Simple and standardized functions
Monitor and react in safety! From safe disconnection (STO) to speed-dependent safety functions (SDI, SLS). Our distributor is also available in conjunction with MOVIMOT® in various safety-related specifications and options.
Functions can be controlled via safe terminals as well as via PROFISAFE. In independent operation our safety options S12 can undertake a local evaluation, processing and disconnection of safety-related signals and functions. A higher-level safety controller is not required in independent operation.
MOVIFIT® | ||
Safety option | S11 | S12 |
Specifically, these are | Safety-related electronics components with safe inputs and outputs | Parameterizable option cards with safe inputs and outputs |
Schematic representation | larger version – click here (JPG) | larger version – click here (JPG) |
Communication | PROFIsafe | PROFIsafe |
Safety functions in accordance with EC 61800-5-2 |
|
|
Safe inputs and outputs |
| Two Variants: S12A
S12B
|
Operation | Fieldbus to PROFIsafe | Fieldbus to PROFIsafe and independent operation |
Satisfy the demanding hygiene requirements in the food and beverage industry as well as in the chemical and pharmaceutical industry with our HygienicPlus design. You can upgrade the design of the MOVIFIT®-FC, already optimized for use in the field, and gain the ideal conditions for use in the wet area.
Efficient control mode for IE2 to IE4 motors and energy-optimized brake control. Operate your plant efficiently with our MOVIFIT® FC standard inverter. This can be graduated and scaled according to the requirements of the end customer.
Efficiency classes | IE1 Standard Efficiency | IE2 High Efficiency | IE3 Premium Efficiency | IE4 Super Premium Efficiency |
DR series Line Start Permanent Magnet (LSPM) motors | DRE 80MJ4 | DRP 90MJ4 | DRU 90LJ4 | |
AC motors of the DR.. series | DRS 90M4 | DRE 90L4 | DRP 100M4 |
For flexible field-oriented drive solutions with MOVIFIT® FC the focus is on complex handling and simple lifting applications in the transport, logistics and automobile industry and in the food and beverage industry: