 |
|
|
| |
| Results for the searchword: DHR41B |
| |
| GSDML file for LT FE 32A for MOVITRAC LTP-B |
|
|
For: MOVITRAC® LTP-B, Drive unit MGF..-DSM with MOVITRAC® LTP-B, Profinet description file for configuring the LT FE 32A Option (anybus Interface of HMS Industrial Networks). To download the configuration file, click on the following link:
http://www.anybus.com/support/file-doc-downloads/anybus-compactcom-30-series
|
|
|
0,57 KB |
|
|
|
to top |
| |
| GSDML file for MOVI-C® decentralized electronics DFC (PROFINET) |
|
version: File: 2.34
(29.04.2020)
For starting up MOVI-C® decentralized electronics with PROFINET interface DFC.
|
|
|
114,42 KB |
|
|
|
to top |
| |
| GSDML file for MOVI-C® MOVIDRIVE technology MDX + CFN21A |
|
version: File: 2.34
(29.04.2020)
For starting up MOVI-C® technology MDX with CFN21A at a PROFIBUS® IO master.
|
|
|
114,67 KB |
|
|
|
to top |
| |
| GSDML file for UCS27B |
|
|
For: Safety Module UCS..B version: 2.2 - 09.08.2012
For configuring PROFINET networks
- For MOVISAFE® UCS27B, expansion module for diagnostics
- PROFINET slave module for communication with master modules
- Supports PROFINET
|
|
|
4,49 KB |
|
|
|
to top |
| |
| GSDML file for UCS50B |
|
|
For: Safety Module UCS..B version: 2.2 - 06.10.2015
For configuring PROFINET networks.
- For MOVISAFE® UCS50B/PN, basic module with diagnostics
- PROFINET slave module for communication with master modules
- Supports PROFINET
|
|
|
12,38 KB |
|
|
|
to top |
| |
| GSDML files and UDTs for ECDriveS – ECC-DFC controllers |
|
version: V2.33 - 24.01.2018
For the project planning of PROFINET networks according to conformance class A (CCA).
- SEW controllers ECC-DFC-24-00 with integrated PROFINET IO fieldbus Interface.
Supports PROFINET IO media redundancy by means of MRP.
Installation Notes
|
|
|
482,12 KB |
|
|
|
to top |
| |
| GSDML files for DFE12B for MOVIDRIVE |
|
|
For: MOVIDRIVE® B Drive Inverter, MOVIDRIVE® Single-Axis Servo Inverter version: 1.0 - 18.03.2005
For configuring PROFINET networks according to conformance class A.
Configuration with topology detection is not supported.
|
|
|
29,39 KB |
|
|
|
to top |
| |
| GSDML files for DFE32B, DFS21B and DFS22B for MOVIDRIVE and gateway operation |
|
|
For: MOVITRAC® LTE-B, version: 2.25 – 21.01.2019
For configuring PROFINET networks according to conformance class B.
The device master file contains entries for MOVIDRIVE® B as fieldbus interface and gateway operation of DFE32B/DFS21B/DFS22B, for example for MOVITRAC® B.
Support PROFINET/PROFIsafe.
Support media redundancy MRP.
|
|
|
19,91 KB |
|
|
|
to top |
| |
| GSDML files for MFE52 for MOVIMOT |
|
|
For: MOVIMOT Gearmotor with Integrated Frequency Inverter, Fieldbus Interface / Field Distributor MOVIMOT version: 2.25 - 17.10.2016
For configuring PROFINET networks according to conformance class B. MOVIMOT decentralized drive system and Z1...Z9 field distributors with PROFINET IO interface MFE52 incl. topology detection, MRP and topology intitialization.
|
|
|
16,64 KB |
|
|
|
to top |
| |
| GSDML files for MOVI-C® CONTROLLERs UHX25A / UHX45A, PROFINET V2.33 |
|
version: 2020.04.29
For the project planning of PROFINET networks according to conformance class C.
- MOVI-C CONTROLLER type UHX25A / UHX45A with integrated fieldbus interface PROFINET IO
Assignment of the DAP version in the UHX45A GSDML file
UHX45A-FW FW fieldbus option N (PROFINET)
UHX45-N V1.0 01.xx 01.00
UHX45-N V2.0 02.xx 02.00
UHX45-N V3.0 03.00 / 03.02 03.00
03.02 / 03.04 03.01
04.00 / 04.02 04.00
UHX45-N V5.0 05.xx 05.xx
Assignment of the DAP version in the UHX25A GSDML file
UHX25A-FW FW fieldbus option N (PROFINET)
UHX25-N V1.0 01.xx 01.00
UHX25-N V2.0 02.xx 02.00
UHX25-N V3.0 03.00 / 03.02 03.00
03.02 / 03.04 03.01
04.00 / 04.02 04.00
UHX25-N V5.0 05.xx 05.xx
The information about the current firmware (FW) version of the fieldbus can be taken from the corresponding project (selection of the corresponding control node -> "Device data" -> "Subcomponents") or alternatively from the diagnostics information of the PROFINET project planning tool you are using.
|
|
|
118,96 KB |
|
|
|
to top |
| |
| GSDML files for MOVI-C® CONTROLLERs UHX65A-R, PROFINET V2.33 |
|
version: 2020.03.23
For the project planning of PROFINET networks according to conformance class C.
- MOVI-C CONTROLLER progressive type UHX65A-R with integrated fieldbus interface PROFINET IO. The file also includes the definition for earlier device FW versions of UHX65A-R
Assignment of the DAP version in the GSDML file
UHX65A-FW FW fieldbus option N (PROFINET)
UHX65-R V2.0 01.00 03.11
UHX65-R V3.0 02.00 03.12
UHX65-R V4.0 03.xx 03.12
UHX65-N V5.0 04.xx 03.14
The information about the current firmware (FW) version of the fieldbus can be taken from the corresponding project (selection of the corresponding control node -> "Device data" -> "Subcomponents") or alternatively from the diagnostic information of the PROFINET project planning tool you are using.
|
|
|
114,67 KB |
|
|
|
to top |
| |
| GSDML files for MOVI-C® CONTROLLERs UHX84A-R and UHX85A-R, PROFINET V2.33 |
|
version: 2020.03.23
For the project planning of PROFINET networks according to conformance class C.
- MOVI-C CONTROLLER power/eco type UHX85A-R / UHX84A-R with integrated fieldbus interface PROFINET IO
Assignment of DAP versions in the UHX84A-R and UHX85A-R GSDML file
UHX84/UHX85-FW FW fieldbus option N (PROFINET)
UHX85-R V1.0 01.00 3.8.0.1
UHX84-R / UHX85-R V2.0 02.00 03.11
UHX84-R / UHX85-R V3.0 02.01 03.11
UHX84-R / UHX85-R V3.0 03.00 03.12
UHX84-R / UHX85-R V4.0 04.xx 03.12
UHX84-R / UHX85-R V5.0 05.xx 03.14
The information about the current firmware (FW) version of the fieldbus can be taken from the corresponding project (selection of the corresponding control node -> "Device data" -> "Subcomponents") or alternatively from the diagnostics information of the PROFINET project planning tool you are using.
|
|
|
114,89 KB |
|
|
|
to top |
| |
| GSDML files for MOVI-C® FIELD CONTROLLERs FHX25A / FHX45A, PROFINET V2.33 |
|
version: 2020.04.29
For the project planning of PROFINET networks according to conformance class C.
- MOVI-C CONTROLLER type FHX25A / FHX45A with integrated fieldbus interface PROFINET IO
|
|
|
121,89 KB |
|
|
|
to top |
| |
| GSDML files for MOVIFIT |
|
|
For: MOVIFIT® MC, SC, FC, Safe Communication version: 2.25 - 15.01.2019
For configuring PROFINET networks according to conformance class B. - MOVIFIT® function level "Classic" and "Technology" of variants FC/SC/MC. - Support PROFINET/PROFIsafe - Support advanced diagnostics with data transmission via PROFINET fiber optic cable - Support MRP for MOVIFIT function levels Classic and Technology - Support S12 safety option for MOVIFIT function level Technology
|
|
|
23,24 KB |
|
|
|
to top |
| |
| GSDML files for MOVIFIT FDC |
|
|
For: MOVIFIT® FDC, MOVI-PLC® Control Technology, MOVI-PLC® Advanced, MOVI-PLC® Application version: 2.25 - 20130925
For configuring PROFINET networks according to conformance class B.
- SEW controller MOVIFIT® FDC with integrated PROFINET IO fieldbus interface.
|
|
|
10,38 KB |
|
|
|
to top |
| |
| GSDML files for MOVIPRO |
|
|
For: MOVIPRO® SDC, MOVIPRO® ADC, Safe Communication version: 2.25 - 24.01.2020
For configuring PROFINET networks according to performance class B.
- For MOVIPRO® unit variant types A / SDC and ADC.
- Support PROFINET/PROFIsafe.
- Support advanced diagnostics for data transmission via PROFINET fiber optic cable.
|
|
|
20,89 KB |
|
|
|
to top |
| |
| GSDML files for MOVISAFE HM31 |
|
|
For: Safety technology from SEW-EURODRIVE, Safe Fieldbus, MOVISAFE® version: Version: 2.2 - 02.04.2013
For: MOVISAFE HM31, safe communication
For configuring PROFINET networks in accordance with conformance class A.
- Supports PROFINET/PROFIsafe
|
|
|
7,36 KB |
|
|
|
to top |
| |
| GSDML files for SEW controllers DHR21B/41B |
|
|
For: MOVI-PLC® Control Technology, MOVI-PLC® Advanced, MOVI-PLC® Application version: 2.25 - 16.12.2013
For configuring PROFINET networks according to conformance class B.
- SEW controllers DHR21/41B-MOVI-PLC®
- SEW controllers DHR21/41B-CCU
with integrated PROFINET IO fieldbus Interface
-Support PROFINET IO media redundancy by means of MRP.
|
|
|
11,25 KB |
|
|
|
to top |
| |
| GSDML files for SEW controllers UHX71B-OSR71B |
|
|
For: MOVI-PLC® Control Technology, MOVI-PLC® Advanced version: 1.0 - 12.02.2013
For configuring PROFINET networks compliant with conformance class B.
- SEW controllers UHX71B-OSR71B
with integrated fieldbus interface PROFINET IO
|
|
|
9,59 KB |
|
|
|
to top |
| |
| GSDML files for UFR41B fieldbus gateway |
|
|
For: MOVIAXIS® Multi-Axis Servo Inverter, Fieldbus Gateways version: 2.25 - 19.09.2013
For configuring PROFINET networks according to conformance class B.
UFR41B fieldbus gateway
Integrated PROFINET IO fieldbus interface
|
|
|
59,53 KB |
|
|
|
to top |
| |
