SEW-EURODRIVE USA

Login
You are here: Home > Documentation \ Software \ CAD > Software Result
Software
Search Filter:
Product
Software Category
 
 
PROFINET IO GSDML file for SEW controllers UFR41B, MOVI-PLC DHR41B, MOVIPRO SDC/ADC, MOVIFIT FDC  

version: 2.25 - 16.01.2014
Supports PROFINET topology detection
Unit master data are required for connecting PROFINET IO devices to a PROFINET fieldbus system.

This file supports the following products:
- Fieldbus gateway type UFR41B
GSDML-V2.1-SEW-UFRxxB-20090809.xml version 2.1
With this gateway, up to 2x32 process data can be exchanged between PROFINET controller and UFR41B gateway.
By configurung the gateway, these process data are distributed via the SEW system bus (SBus) to a maximum of 16 inverters or servo inverters of the MOVITRAC® B, MOVIDRIVE® B and MOVIAXIS® series.

- MOVI-PLC Advanced type DHR41B and CCU controller
GSDML-V2.1-SEW-Controller-20090811.xml version 2.1
Up to 120 process data can be exchanged between  PROFINET controller and MOVI-PLC Advanced type DHR41B.

MOVIFIT FDC controller
GSDML-V2.1-SEW-MOVIFIT-FDC-20110202.xml version 2.1
Up to 120 process data can be exchanged between PROFINET controller and MOVIFIT FDC.

MOVIPRO SDC/ADC controller
GSDML-V2.2-SEW-MOVIPRO-20110108.xml version 2.2
Up to 120 process data can be exchanged between PROFINET controller and MOVIPRO SDC/ADC. Advanced diagnostics for data transmission via PROFINET fiber optic cable POF is supported.

11,07 KB
to top