SEW-EURODRIVE USA

Login
 
You are here: Home >

MOVIMOT® Gearmotor with Integrated Frequency Inverter

Documentation
  Documentations for: MOVIMOT® Gearmotor with Integrated Frequency Inverter
Software
  Software for: MOVIMOT® Gearmotor with Integrated Frequency Inverter
Products
A tried-and-tested combination of gearmotor and digital frequency inverter

 
MOVIMOT® gearmotor with integrated frequency inverter
MOVIMOT®, the gearmotor with an integrated frequency inverter, is a tried-and-tested combination of gearmotor and digital frequency inverter in the 0.5 to 5.4 HP power range. Despite the integrated frequency inverter, MOVIMOT® requires only slightly more installation space than standard gearmotors and can, of course, be supplied in all standard versions and mounting positions, with and without a brake, for supply voltages of 380 to 500 V and 200 to 240 V. The gearmotors have IP54 enclosure as standard, but the MOVIMOT® gearmotor is also available with IP55, IP65 and IP66 enclosures on request. This gearmotor is a heavy-duty and compact version for a number of decentralized drive solutions. SEW-EURODRIVE offers a SafetyDrive package for this application to fit plants in compliance with safety category 3 of EN 954-1.
NEW: MOVIMOT® in combination with the new DR mtor series in diverse efficiency versins

Technical data
Speed range [rpm]
Voltage [V]
Connection
Approval
Power [kW] (HP)
Torque [Nm] (lb-in)
280 to 1400 (1700)
3 x 380 to 500 (460)
Star
IEC or cULus
0.37 to 4.0 (0.5 to 5.4)
2.52 to 27.5 (18.4 to 199)
290 to 2900
Delta
0.55 to 4.0 (0.75 to 5.4)
1.81 to 13.2 (16.0 to 87.4)
280 to 1700
3 x 200 to 240 (230)
Star-Star
 
0.37 to 2.2 (0.5 to 3.0)
2.08 to 12.4 (18.4 to 109)

MOVIMOT® options

MOVIMOT® options
Brake control
BEM/BES/URM
 
MOVIMOT® can be equipped with a BEM, BES or URM brake control system as an option in conjunction with a modular terminal box. The option is integrated in the MOVIMOT® terminal box. BEM controls the standard brake, BES controls the DC 24 V brake. URM is a voltage relay for controlling brakes.
Braking resistor
BW100... / BW200...
 
The BW100.../BW200... braking resistors in IP65 enclosure convert the MOVIMOT® drive's regenerative energy of up to 100 W/200 W (0.134 hp / 0.268 hp) continuous power into heat.
Braking resistor
BW150... / BW068...
 
The BW150.../BW068.. braking resistors in IP66 enclosure convert the MOVIMOT® drive's regenerative energy of up to 600 W/1200 W (0.805 hp /1.609 hp) continuous power into heat.
DC 24 V  power supply MLU11A
 
The optional DC 24 V power supply MLU11A is mounted in one of the MOVIMOT® cable entry openings and allows for operation of one MOVIMOT® including an option with a current consumption of up to 70 mA (MBG11A, MWA21A) without an external 24 V auxiliary power supply.
DC 24 V power supply MLU13A
 
The optional integrated DC 24 V power supply MLU13A is mounted in the MOVIMOT® terminal box and allows for operation of one MOVIMOT® including an option with a current consumption of up to 70 mA (MBG11A, MWA21A) without an external 24V auxiliary power supply.
MLG setpoint control module
 
The optional MLG..A setpoint generator is mounted in one of the cable entry openings of MOVIMOT® and offers the possibility of adjusting the input speed in the range of -100% to +100 % fmax (potentiometer f1) as well as of powering the inverter with the DC 24 V auxiliary voltage.
MBG11A setpoint control module
 
The optional MBG11A setpoint control module has two keys and a display. MBG11A.. makes it possible to adjust the speed remotely in the range from -100% to +100% fmax (potentiometer f1). Up to 31 MOVIMOT® units can be controlled at the same time.
MWA21A setpoint converter
 
The optional MWA21A setpoint converter converts an analog setpoint and the control signals into an RS-485 protocol. The MWA21A enables the MOVIMOT® to be controlled remotely from the control cabinet. Up to 31 MOVIMOT® units can be controlled at the same time.
DBG60B keypad
 
The DBG60B keypad can be used to control MOVIMOT® drives with integrated AS interface in manual mode. Furthermore, important information can be displayed in monitor mode.
The DBG60B keypad is connected to the diagnostic interface in the MOVIMOT® terminal box.
MDG11A diagnostic unit
 
The optional MDG11A diagnostic unit indicates the operating status, output current, terminal status and MOVIMOT® fault codes when faults occur.
MNF11A line filter
 
The MNF11A integrated line filter option is mounted in the MOVIMOT® terminal box and allows for a drive system that complies with the emitted interference stipulated in EN 61800-3 as well as with the class B limit according to EN 55011 and EN 55014.
P2.A mount for mounting near motor
 
The P2.A mounting plate option allows the MOVIMOT® inverter to be mounted away from the motor (offset). The inverter is connected to the motor using a pre-fabricated hybrid cable. MOVIMOT® with option P2.A is supplied in enclosure IP65.

 
back to top