 |
MOVIMOT® gearmotor
with integrated frequency inverter
|
|
MOVIMOT®, the gearmotor with an integrated
frequency inverter, is a tried-and-tested combination of gearmotor
and digital frequency inverter in the 0.37 to 3.0 kW (0.50 to 4.0
hp) power range. Despite the integrated frequency inverter, MOVIMOT® requires only slightly more installation
space than standard gearmotors and can, of course, be supplied
in all standard versions and mounting positions, with and without
a brake, for supply voltages of 380 to 500 V and 200 to 240 V. The
gearmotors have IP54 enclosure as standard, but the MOVIMOT® gearmotor is also available with
IP55, IP65 and IP66 enclosures on request. This gearmotor is a heavy-duty
and compact version for a number of decentralized drive solutions.
SEW-EURODRIVE offers an optional SafetyDrive package for this application
to fit plants in compliance with safety category 3 of EN 954-1.
|
|
Technical data
|
|||||
|---|---|---|---|---|---|
|
Speed range [rpm]
|
Voltage [V]
|
Connection
|
Approval
|
Power [kW] ([hp])
|
Torque [Nm] ([lb-in])
|
|
280 to 1400
|
3
x 380 to 500 (400)
|
Star
|
IEC
or cULus
|
0.37 to 3.0 (0.50 to
4.0)
|
2.52 to 20.5 (22.3 to
181)
|
|
290 to 2900
|
Delta
|
0.55 to 3.0 (0.74 to
4.0)
|
1.81 to 9.9 (16.0
to 88)
|
||
|
280 to 1700
|
3 x 380 to 500
(460)
|
Star
|
cULus (NEMA motor)
|
0.37 to 3.7 (0.50 to
5.0)
|
2.08 to 20.7 (18.4 to
183)
|
|
280 to 1700
|
3 x 200 to 240
(230)
|
Star-Star
|
0.37 to 2.2 (0.50 to
3.0)
|
2.08 to 12.4
|
|
|
MOVIMOT® options
|
||
|---|---|---|
|
Brake
control
BGM/BSM/URM
|
 |
MOVIMOT® can be equipped with a BGM, BSM or
URM brake control system as an option in conjunction with a modular
terminal box. The option is integrated in the MOVIMOT® terminal box. BGM controls the standard
brake, BSM controls the DC 24 V brake. URM is a voltage relay for
controlling brakes.
|
|
Braking
resistor
BW100... / BW200...
|
 |
The
BW100.../BW200... braking resistors in IP65 enclosure convert the
MOVIMOT® drive's regenerative
energy of up to 100 W/200 W (0.134 hp / 0.268 hp) continuous power
into heat.
|
|
Braking
resistor
BW150... / BW068...
|
 |
The
BW150.../BW068.. braking resistors in IP66 enclosure convert the
MOVIMOT® drive's regenerative
energy of up to 600 W/1200 W (0.805 hp /1.609 hp) continuous power
into heat.
|
|
DC 24 V power supply MLU11A
|
 |
The optional DC
24 V power supply MLU11A is mounted in one of the MOVIMOT® cable entry openings and allows for
operation of one MOVIMOT® including
an option with a current consumption of up to 70 mA (MBG11A, MWA21A)
without an external 24 V auxiliary power supply.
|
|
DC 24 V power supply MLU13A
|
 |
The optional integrated
DC 24 V power supply MLU13A is mounted in the MOVIMOT® terminal box and allows for operation
of one MOVIMOT® including an
option with a current consumption of up to 70 mA (MBG11A, MWA21A)
without an external 24V auxiliary power supply.
|
|
MLG setpoint control module
|
 |
The optional MLG..A
setpoint generator is mounted in one of the cable entry openings
of MOVIMOT® and offers the possibility
of adjusting the input speed in the range of -100% to +100 % fmax (potentiometer f1) as well as of powering
the inverter with the DC 24 V auxiliary voltage.
|
|
MBG11A setpoint
control module
|
 |
The optional MBG11A
setpoint control module has two keys and a display. MBG11A.. makes
it possible to adjust the speed remotely in the range from -100%
to +100% fmax (potentiometer f1).
Up to 31 MOVIMOT® units can be
controlled at the same time.
|
|
MWA21A setpoint
converter
|
 |
The optional MWA21A
setpoint converter converts an analog setpoint and the control signals
into an RS-485 protocol. The MWA21A enables the MOVIMOT® to be controlled remotely from the
control cabinet. Up to 31 MOVIMOT® units
can be controlled at the same time.
|
|
DBG60B keypad
|
 |
The
DBG60B keypad can be used to control MOVIMOT® drives
with integrated AS interface in manual mode. Furthermore, important information
can be displayed in monitor mode.
The
DBG60B keypad is connected to the diagnostic interface in the MOVIMOT® terminal box.
|
|
MDG11A diagnostic
unit
|
|
The optional MDG11A
diagnostic unit indicates the operating status, output current,
terminal status and MOVIMOT® fault
codes when faults occur.
|
|
MNF11A line filter
|
 |
The MNF11A integrated
line filter option is mounted in the MOVIMOT® terminal
box and allows for a drive system that complies with the emitted
interference stipulated in EN 61800-3 as well as with the class B
limit according to EN 55011 and EN 55014.
|
|
P2.A mount for
mounting near motor
|
 |
The P2.A mounting
plate option allows the MOVIMOT® inverter
to be mounted away from the motor (offset). The inverter is connected
to the motor using a pre-fabricated hybrid cable. MOVIMOT® with option P2.A is supplied in enclosure
IP65.
|
| back to top |
