|
Technical
data
|
||||
|---|---|---|---|---|
|
Surface
protection
|
Coating
structure
|
Coating thickness [mils]
(µm)
|
Suitable
for1
|
|
|
Exterior
|
Interior
|
|||
|
OSG
 |
1 × Dip
primer
1 × Single-component primer
|
Minimum
1.5
to 2.0
(40 to 50)
|
Generally
not suitable as finish coat. Additional coating to be applied after
shipment from SEW-EURODRIVE.
|
|
|
Standard
 |
1 × Dip
primer
1 × Single-component top coat
|
Minimum
1.5
to 2.0
(40 to 50)
|
Normal ambient conditions
|
|
|
–
|
Heated buildings with clean atmospheres
(e.g., offices, shops, schools, hotels).
|
|||
|
OS1
 |
1 × Dip
primer
1 × Single-component primer
1 × Single-component top coat
|
Minimum
3.0
to 4.0
(75 to 100)
|
Low environmental impact
|
|
|
Atmospheres with
low levels of pollution.
|
Unheated buildings where condensation
may occur (e.g., depots, sports halls).
|
|||
|
OS2
 |
1 × Dip
primer
1 × Two-component primer
1 × Single-component top coat
|
Minimum
4.0
to 5.0
(100 to 125)
|
Medium environmental
impact
|
|
|
Urban and industrial
atmospheres, moderate sulfur dioxide pollution. Coastal areas with
low salinity.
|
Production rooms with high humidity
and some air pollution (e.g., laundries).
|
|||
|
OS3
 |
1 × Dip
primer
1 × Two-component primer
1 × Two-component top coat
|
Minimum
5.0
to 6.0
(125 to 150)
|
High environmental impact
|
|
|
Industrial areas
and coastal areas with moderate salinity.
|
Chemical plants, shipyards.
|
|||
|
OS4
 |
1 × Dip
primer
1 × Two-component primer
1 × Two-component top coat
1 × Two-component clear coat
|
Minimum
7.5
to 9.0
(190 to 230)
|
Very high environmental
impact
|
|
|
Industrial areas
with high humidity and aggressive atmosphere.
|
Buildings or areas with almost permanent
condensation and with high pollution (e.g., food processing, breweries,
dairies).
|
|||
|
1) Conditions listed are general recommendations only.
Each environment must be evaluated independently.
|
||||
|
Symbol
|
Coating Type
|
Coating Supplier
|
Product
|
|---|---|---|---|
 |
Dip primer
|
Various per MS 01 901
_ 99
|
|
 |
Single-component
primer (water-based)
|
Burke Industrial Coatings
|
Prime Solution 5255
|
 |
Single-component
top coat (water-based)
|
Burke Industrial Coatings
|
Superlife 316 DTMR
|
 |
Two-component epoxy
primter (water-based)
|
Burke Industrial Coatings
|
Steel Plus Epoxy Primer
|
 |
Two-component epoxy
top coat (water-based)
|
Burke Industrial Coatings
|
Steel Plus CE 316 Epoxy
|
 |
Two-component clear
epoxy top coat (water-based)
|
Burke Industrial Coatings
|
Steel Plus CE Clear Gloss Epoxy
|
| back to top |
